1100 LITER PLASTIC WASTE CONTAINER WITH PEDAL


Product Code :PCK-1100P




You can use the Information and Offer Form Button below for any questions you want to ask or get more detailed information about the product.

1100 Liter Plastic Waste Container Technical Specification :

Flat lid that can be opened by hand, with two handles on the front to lift it, and with a rubber gasket on the front edge. The boat is equipped with two handles fixed with screws on the sides. In addition, there are two sides obtained by pressure and two rear handles determined with ribs. The microchip slot obtained during printing is located at the bottom of the front of the boat.

  • - Body and cover with guarantee certificate and certificate, each of which is printed in one piece with high-density polyethylene (HDPE) injection method.
  • -Fully recyclable, resistant to violet and infrared rays, acids, and alkalis, and high and low air temperatures.
  • -DIN 30700 male attachment with printing grooves on the front edge of the container and no cutting edges or sharp corners.
  • - Liquid discharge hole made of PEHD, with an impact-resistant plug, on the underside of the container.
  • -Four solid rubber wheels with a diameter of 200 mm that can rotate in all directions. The front wheels are each equipped with a pedal-independent braking system.